Best Epoxy Resin for Beginners in India (2026-27 Guide)
October 20263 min read
October 2026Share
There are many epoxy resins on sale in India, and for a beginner they all look the same. But the resin you start with makes a big difference. A beginner-friendly resin forgives small mistakes, while a difficult one can put you off resin art altogether. Here's how to choose.
What makes a resin beginner-friendly?
1. A simple, clear ratio
Look for a clear ratio like 2:1 or 3:1 with instructions that say whether to measure by weight or volume. Fusion kits are mixed by weight.
2. Enough working time
A pot life of around 30–45 minutes gives you time to mix, colour and pour without rushing. Vitro 2:1 gives about 30–35 minutes, and Flex 3:1 about 40–45 minutes.
3. Self-levelling and low bubbles
A good coating resin spreads by itself and releases bubbles easily, so you get a smooth, glossy surface without much effort.
4. Crystal-clear and UV-stable
Clear results build confidence. A UV-stabilised formula also helps your pieces resist yellowing over time.
5. Made for Indian weather
Heat, humidity and cold all affect resin. Choose a resin that's tested for Indian conditions.
6. Small pack sizes
A beginner doesn't need 5 kg. Small kits let you practise without a big spend.
2:1 or 3:1: which should a beginner buy?
- Start with 2:1 coating resin for coasters, keychains, trays, nameplates, frames and jewellery. It's the easiest to learn on.
- Choose 3:1 casting resin for flower preservation, varmala blocks and deep moulds, once you're comfortable.
Our detailed comparison: 2:1 vs 3:1 Epoxy Resin.
Best Fusion Resin picks for beginners
- Vitro 2:1 – 300g: the easiest first kit for coasters and keychains
- Flex 3:1 – 400g: try deep pours and small flower blocks
- Starter Bundle: both resins in one box, to learn coating and casting
💡 Pro tip: Buy a small kit first. Once you know what you like making, move up to bigger packs like Vitro 1.5kg, which cost less per gram.
Best first projects
- Coasters: see our first project guide
- Keychains and bookmarks
- A small tray
- A nameplate
- A small flower block
What else to buy: What You Need to Start Resin Art in India.
FAQs
Which epoxy resin is best for beginners in India?
A 2:1 coating resin with a clear ratio, good working time and a self-levelling, UV-stable finish, such as Vitro 2:1.
Is 2:1 or 3:1 resin easier?
2:1 is usually easier for small, thin projects. 3:1 is made for thick, deep pours.
How much resin should a beginner buy?
300–400 g is enough for several small projects. The Starter Bundle gives you both types.